Some printing companies mainly in the bottle, such as a round workpiece, such as printing of bar codes can not easily be identified problem, and gradually the use of UV printing. However, direct ultraviolet light on the human body has hurt, especially the long-term work in the machine next to the operators in the skin, glasses and other more dangerous.
Response to the above, the plant developed a disc dryer GY.UV5KW/IIPY, its operation flow printing operators are sitting on the side of the machine, the workpiece into the left and right output, so that the workpiece into the output drying zone when, after ultraviolet irradiation rotation in order to complete the drying, to avoid leakage of ultraviolet light on the human body injury, and resolved when using UV drying bottle of some high-resolution bar code printing using UV ink products can not be this difficult problem. To make our products have broad prospects for development.
Equipment characteristics:
1. The use of high-power mercury lamp UV light-cured.
2. Wuji speed conveyor belt speed. (Using VVVF motor)
3. Controlled low-noise wind capacity to ensure that the plastic parts are not deformed.
4. The use of human design, to hide a good optical performance, the department's application of feed three times a refractive role in India was pre-drying, the product will not刮蹭, and the operators will not be affected by direct ultra-violet light damage.
5. Sub-control power: 50%, 75%, 100% .6. Of m show the work of state, 30-seat use.
Dimensions: length 2.1 meters, width: 0.8 meters Height: 1.67 meters, available bottle diameter: φ10mm-150mm, height less than 350mm
Speed :0-22 meters / min, total power: 12kw, Power supply voltage: 440V60HZ, Lamp: 5KW / 2 sticks using photoperiod-sensitive lights, power, and strong light.